滚刀钻头在桩基施工中的应用     

朱玉新  王保健等 《中国煤田地质》2001,13(2):78-79

焊齿破岩滚刀钻头适应多种地层钻进。本文主要介绍了焊齿破岩滚刀钻头的钻进工作原理，在桩基施工中的钻进技术参数，滚刀刀齿的修复及应用效果。  相似文献   

Application of short-wave infrared spectroscopy to define alteration zones associated with the Elura zinc–lead–silver deposit, NSW, Australia     

Yanyan Sun  Philip K. Seccombe  Kai Yang   《Journal of Geochemical Exploration》2001,73(1):63

Short-wave infrared reflectance spectra obtained from a Portable Infrared Mineral Analyser (PIMA) have been used to define alteration zones adjacent to base metal sulfide ore bodies at the Elura Mine, Cobar, Australia. The spectroscopic work identified white mica (sericite), chlorite and carbonates of hydrothermal origin in the alteration zones associated with the ore bodies. Weathering, alteration and ore zones can be discriminated by variations in the intensity and wavelength of relevant absorption features. Hydrothermal alteration is classified into four principal types, namely sericitic, silicic, chloritic and carbonate alteration. The first three types comprise overprinting hydrothermal assemblages of quartz, sericite, chlorite, ankerite, siderite, calcite and sulfides developed in strongly altered metasiltstone and slate of Early Devonian age, adjacent to the zinc–lead–silver mineralisation. An extensive zone of carbonate alteration, manifested as porphyroblasts of siderite in the host metasediments, is recognised beyond the zones of strong alteration. Spectral analysis is consistent with the mineralogical data obtained from XRD and XRF analyses and defines the limits of the alteration zones to distances of about 80 m around the ore bodies. The study demonstrates the potential for spectral analysis to assist with drill hole logging and the identification of alteration zones as part of mineral exploration and development programs.  相似文献   

Quaternary vertical offset and average slip rate of the Nojima Fault on Awaji Island, Japan   总被引：5，自引：0，他引：5  

Akihiro Murata  Keiji Takemura  Takao Miyata  Aiming Lin 《Island Arc》2001,10(3-4):360-367

Abstract Drilling was carried out to penetrate the Nojima Fault where the surface rupture occurred associated with the 1995 Hyogo-ken Nanbu earthquake. Two 500 m boreholes were successfully drilled through the fault zone at a depth of 389.4 m. The drilling data show that the relative uplift of the south-east side of the Nojima Fault (south-west segment) was approximately 230 m. The Nojima branch fault, which branches from the Nojima Fault, is inferred to extend to the Asano Fault. From the structural contour map of basal unconformity of the Kobe Group, the vertical component of displacement of the Nojima branch–Asano Fault is estimated to be 260–310 m. Because the vertical component of displacement on the Nojima Fault of the north-east segment is a total of those of the Nojima Fault of the south-west segment and of the Nojima branch–Asano Fault, it is estimated to total to 490–540 m. From this, the average vertical component of the slip rate on the Nojima Fault is estimated to be 0.4–0.45 m/10³ years for the past 1.2 million years.  相似文献   

X射线荧光测井井液的影响与校正     

葛良全  周四春  谢庭周  章晔  程业勋  侯胜利 《物探化探计算技术》1996,(S5)

X射线荧光测井中 ,井液位于井下探管与井壁之间 ,它的影响不但表现在对特征X射线的吸收 ,而且表现在对源初级射线和特征 X射线的散射。井液的校正采用硬件与软件相结合的方法 ,在硬件上 ,使含有探测器的部分制成单独的短臂 ,有效地保证了探测窗与井壁的良好接触 ;在软件上 ,提出的双散射峰法和散射峰 -逃逸峰法 ,能够校正 0 - 10 mm厚的井液对 X射线荧光测井结果的影响  相似文献   

冲击反循环工程钻机自动同步机构的原理          下载免费PDF全文

喻重山  孙孝庆 《探矿工程》1994,(4):1-3

采用行星齿轮差速机构作为ＧＣＦ－１５００型冲击反循环工程钻机的自动同步机构，已经获得成功。分析了该机构的运动学原理和力平衡原理。该机构具有结构简单、工作可不的特点。  相似文献   

强震现场流动无线遥测地震台网观测系统的研制     

张孟申  李建国 《地震地磁观测与研究》1994,15(4):39-42

描述了强震现场流动无线遥测地震台网观测系统的技术设计，系统构成，工作原理及应用。  相似文献   

广西便携式决策气象服务系统     

苏用能  李宇中 《气象研究与应用》2001,22(3):51-53

介绍广西便携式决策服务系统的设计思路和开发过程，指出：融合因特网浏览器技术、以Ｗｅｂ网站和超文本网页方式来组织构建决策气象眼务系统，是实现决策服务内容表现形式向生动化、形象化和多媒体化转变的重要途径。  相似文献   

气举反循环钻深度的理论计算与加深试验   总被引：2，自引：0，他引：2  

耿令强 《中国煤田地质》2001,13(2):86-87

运用气举反循环钻进、在满足一定条件下适当增加双壁钻具长度即可得到较大钻进孔深，本文通过理论计算及实验，证实了使用现有设备，气举气循环可以更好的满足超午米深水井的施工要求。  相似文献   

煤矿采空区钻孔注浆治理工艺   总被引：6，自引：0，他引：6  

任红旗 《中国煤田地质》2001,13(2):102-103

钻孔注浆充填固结处理煤矿采空区塌陷是一种经济快捷的有效方法，本文就其施工工艺方法进行了简单分析，期望能为其它类似工程提供参考。  相似文献   

X射线荧光探矿技术在福建紫金山铜矿区的应用效果     

许春林 《物探与化探》1993,17(2):116-119

应用放射性同位素x射线荧光分析仪测定各种元素含量在许多文献中均有报道。本文主要介绍84A86型轻便x射线荧光分析仪首次在福建省紫金山铜矿区测定粉末样、块状岩心、坑道壁中铜矿的含量及其所取得的经济效益。  相似文献